Aluminum door and window machines is currently used in many door and window industries. Do you know what operations we should avoid during the use of aluminum door and window machines? Let's listen to a brief introduction from professionals.

1. Castings of aluminum door and window machine should be placed on the corresponding chassis and brackets, and suspended parts must be avoided.

2. When the machine is in use, the movements must be gentle, and pushing and pulling must go with the flow. If you find any difficulty, do not push hard. You should troubleshoot first. Deformation is the main reason why aluminum doors and windows are difficult to push and pull. Always check the joints of the aluminum door and window frames and walls. If the aluminum doors and windows become loose over time, it will easily cause the overall frame to deform, which will make the doors and windows unable to be sealed.

3. During the heat treatment process of the machine, for the sake of accuracy, necessary cleaning and connection must be carried out according to the operating status of the machines, including checking whether there is any corresponding oil stains on the equipment. At the same time, pay attention to the fact that the material specifications and types of processing are not confused with each other. Necessary cleaning is something that should be paid attention to before and after processing, so as to better ensure that the quality of the equipment will not be interfered by any factors.

4. When replenishing lubricating oil for equipment, remember to avoid using kerosene lubricating oil on air compressor parts, as this will damage the equipment and reduce its service life.

5. The equipment can be cleaned with a soft cloth dipped in water or neutral detergent. Avoid using ordinary soap and washing powder. Strong acid and alkali detergents such as sewage powder and toilet detergent must never be used. Just find a soft cloth and use it lightly. Just wipe it lightly, because there will be special substances on the surface of metal. When encountering these strongly alkaline substances, some chemical changes will occur, which will affect the operation of the machine.

6. If the equipment is not working, the fuse switch must be turned off to better ensure the safety of workers and the safety of the company's property.